|
9" axle bracket order for svo brake
This doesn't look obvious to me. I like to get it right before I get them pressed on. Is this the right order for the brackes and bearing for the axle?
I have to open up a bit the svo brake bracket opening to slide over the bearings (dermel). I talk to Joe at A&C and I think this is what he was explaining to me. ???? small bracket , svo brake bracket, bearing , thick retaining washer.???? !!! http://www.clubcobra.com/photopost/d...m/brakesvo.JPG |
I got my rear disk set up from A&C and no problems getting the bearings to clear the backing plates. I.E. the only thing I had was the four bolt axle retainer, main bearing and then the bearing retainer.
Thanks, Jim |
You can eliminate the disc brake dust shield entirely and get brackets that either weld to the axle tubes or bolt to the bearing retainers. The dust shields are/were used in OEM applications to keep rain, mud, excess dirt off of the rotors. Not too useful on our cars.
|
I could be wrong, but I think you are missing a spacer that takes up the thickness of the bracket/plate. It goes on between the retainer and the bearing. Mine was not put on first and I had to split it in two. Made it extremely difficult to assemble. Mike
Your retainer is different than mine, this may be part of your retainer |
gman
I think your right . Just eyeballing the how far the bearing goes in and the thickness of the brake bracket there is a space. I need a thick washer. RDC |
I called the "the9inchfactory" 1 800 332 3450 and they had the right spacer for the svo brake bracket. 10 bucks.
Ron |
Glad I could help. Mike
|
Don't forget your seals and be carefull when you put them in a piece of pvc plastic pipping works great good luck
|
| All times are GMT -7. The time now is 08:35 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: