- -
DYNO Day
(
http://www.clubcobra.com/forums/arizona-cobras/100410-dyno-day.html)
| Mike Brasfield |
10-21-2009 03:15 PM |
DYNO Day
As some of you know, I have been (now completed) installing a new engine in my Cobra. In the process I found a speed shop in Gilbert that has a DYNO and he is willing to do a DYNO day on a saturday (TBD) at his shop for us. Normally he charges $150 for two pulls but will do it for $100. He will not do any tunning but will be glad to set appointments for anyone who wants to come back and "tweek" their motors at a later date.
Coffee, donuts and lots of HP all around. His shop (Speed Sports) is located near Eillot and Gilbert. Any date is OK for him. Let me know if there is any interest and I will coordinate with Speed Sports for a day that will work for all or most of you who are interested.
I would be on the road with you this weekend but I want to put a few local miles on the engine before a long road trip. Have a fun drive.:)
|
| DWRAT |
10-21-2009 06:55 PM |
I am down with a dyno run, just let me know when.
Dan
|
| Mike6467 |
10-22-2009 09:29 AM |
I'm interested also. Just name a date. Mike.
|
| mikiec |
10-22-2009 09:40 AM |
Mike,
If you set this up I can get an email out to the gang.
Mike
|
| Bob Broberg SPF667 460BB |
10-22-2009 12:29 PM |
The club as a group did this once in Chandler at a Mustang Dyno. Everyone was upset with the low numbers. If the Dyno in Gilbert is a Dynojet you will get more favorable numbers.
AZ Bob
|
| Tim Brewer |
10-22-2009 07:45 PM |
Guys, that $100.00 for two pulls with no tuning, is still on the high side. I'd work that guy a little harder.
|
| DWRAT |
10-22-2009 07:56 PM |
Quote:
Originally Posted by Tim Brewer
(Post 995187)
Guys, that $100.00 for two pulls with no tuning, is still on the high side. I'd work that guy a little harder.
|
I agree that $100 per person is high when there are several of us there. However I am more then willing to pay the price to see that I have more HP then all the other AZ Cobra guys.:) |
| Rwillia4 |
10-22-2009 08:32 PM |
FYI- it is $70 for an hour on the dyno with tuning in virginia. $40 for two pulls. yeah it is a little high!
|
| Blackmagic1 |
10-22-2009 10:57 PM |
See Keith(the owner) at Arizona Dyno Chip. Good guy,great with tunes.480-496-8800
|
There is always B&R Automotive; I think I have a picture in my gallery. Also Dyno Comp in Norht Scottsdale. Both may give us a deal. B&R is normally closed on Saturday but they may do it. I think they charge me $75 and surprised me with numbers... They can play with the numbers as well but who is kidding who? %/
|
| greg schroeder |
10-24-2009 06:08 PM |
I'd go to AZ dynochip. I've been to dyno days in the past and the best one was here. The power values come out the same as drag strip trap speed calculators.
http://www.azdynochip.com/rates.php |
| Old Phart |
10-25-2009 10:40 PM |
Quote:
Originally Posted by Blackmagic1
(Post 995229)
See Keith(the owner) at Arizona Dyno Chip. Good guy,great with tunes.480-496-8800
|
What a great place! Got 8 pulls and carb dial in adjustments for $150. (2.5 hours) for the new engine in my AC MKIV. Outstanding. They can do groups on weekends or less busy on weekdays. They will serve food & drinks, too. |
| greg schroeder |
10-26-2009 07:24 AM |
Quote:
Originally Posted by Old Phart
(Post 995904)
What a great place! Got 8 pulls and carb dial in adjustments for $150. (2.5 hours) for the new engine in my AC MKIV. Outstanding. They can do groups on weekends or less busy on weekdays. They will serve food & drinks, too.
|
Exactly. Great people at AZ Dynochip. Very smart guy too.
Here's the dyno day link.
http://www.arizonadynochip.com/rates.php |
| Mike Brasfield |
10-26-2009 09:23 AM |
Dynochip seems to be a better deal. I'll let someone else take over.
|
| DWRAT |
11-18-2009 11:07 PM |
Anyone want to get this going?
|
| mikiec |
11-19-2009 11:51 AM |
Dan,
Figure I'll wait until early next year. You need to get some good miles on the new motor before going to the dyno.
Mike
|
| Mike6467 |
11-22-2009 09:40 AM |
I went to Az Dyno last week and for about $100 he made several pulls to tune it just right. He also solved burping problem that he traced to a faulty rad. cap and added about 2 qts. of anti freeze. A great deal and a great guy in my book. Mike.
|
Mikiec, put a good old 408 in yours and be done with it.
|
| All times are GMT -7. The time now is 01:42 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
