|
3 link instructions needed.
I am looking for a set of FFR 3 link installation instructions. Does anyone have a set that I can borrow / copy / buy ?
|
|
DWRAT, thanks for the link. Do you know of anyone up there who has installed one ? I'd like to crawl under the rear and get some pictures.
|
JOhn wants to crawl under someone's rear for photos?
|
That John...he's a tricky guy. He's probably got a pair of glasses with a digital camera built in. Not letting him gt near my rear end.
|
John,
I have the Levy 5 link you can look at. |
You know that I read and re-read that sentence when I wrote it and thought of the possible repercussions but I didn't know of any other way to say it. Karl, your rear end is safe, I don't do Cheyv products. Dan, you and your dog are safe but watch out for the Cobra. DWRAT, no that is quite a different setup. Let's see if I can get out of this posting without any sideways comments.
|
I am SO relieved. Didn't think that anyone would really be interested in taking a picture of my firm, muscular, buns of steel.
|
I'm going to be sick.
AZ Bob |
Hi John,
I have the 3-link setup on my (almost finished:3DSMILE:) Coupe, what do you need pics of ? If you want to see it I am up here in Payson. Dave Knight |
Hi Dave, Do you have any pictures of the installation ? Where did you start ? I have a FFR MKII chassis. Any shots of the right and left sides and center are appricated. Did you have any install problems ? Do you happen to still have the installation instructions ? Thanks, John
|
Hi John,
Take a look at these links, http://picasaweb.google.com/beartoothweb/3LinkInstall# http://www.sierrafirerescue.com/cobra/3link/3link.html http://www.ffcobra.com/galt/FFR_3_Li...Suspension.pdf The Coupe kit I have started out as a 4-link and as far as I could tell was the same rear setup as my mk-II Cobra. It was a pretty straight forward install as I had good access to all areas, it might be a little more complicated on a finished car. I can take some pic's tomorrow and look for the install doc's if the above links don't help. Dave |
Does the Factory Five 3 link use the stock lenght lower control arms from the Fox Body Mustang?
Simon |
Quote:
Dave |
Dave,
Almost finished? What's it been.... 7 8 years? :):) say Hi to Paula for me. Mike |
Hi Mike,
What took you so long? I have been expecting a ribbing from the peanut gallery.:LOL: I have been having a lot of fun doing the coupe, changing lots of stuff, doing my own electrical and you would be proud, manual brakes and a potato on the lump.**) Everything works, just finishing the interior then the glass will be the final item. http://i243.photobucket.com/albums/f...r/IMG_0835.jpg Big hug to Ginny... p.s. Sorry about the thread-jack John, hope the doc's help... |
| All times are GMT -7. The time now is 05:44 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: