|
Who makes this kit?
I am buying this kit and I have no idea who builds it. Can someone please help? Anyone recognize the frame?
http://s253.photobucket.com/albums/h...7/cobra%20kit/ |
speedfreakrx7
looks to be a CMC/streetbeast.I'm 95% sure. where do you live? Bill |
Is there any paper work with it ?????
you should get an MSO number with matching paper work, IF there is no paper work then you may run into major problems with registration and titeling. original paper work would have the name of the MFG. on it. if there is no paper work you may end up with a big paper weight....... you may want to pass on this one...... |
It is a CMC/ street beast
Paper work can be a challenge.
I have built a couple of them. Still have one and think they're a great car. There has been great criticism of the CMC company for their over zealist sales.(that is over polite way of saying what they did). I am not familiar with SB's customer relations. |
Unfortunately there is no paperwork but I got it for a very good deal. Does anyone have a copy of the build manual? Looks like the previous owner was going to change the front suspension to something else. I am going to contact SB today and see what I can figure out about all the missing parts.
Thanks for the replies. Doug from AZ |
It sure looks familiar but I can't place it off hand.
|
Cmc
I just looked at the photos closer. Rear coil and front upper coil mts are cut off. Front tops would be usefull if you intend to use Must II. I have a frame that I will be "bringing in" to clean up for sale. I have a manuel that I can copy for you. I will take pics of he frame so you can see what has been removed( I would think this was done for coil-overs) There is nothing difficult to refab.I know that the entire hinge kit is something that you really will needbecause of it being unique in it's geometry and sizing for the kit.
|
Yes, I have Afco aluminum coilovers that came with the kit as well as 12in. rotors with 4 piston Wilwood calipers. I'm sure that was the plan for build up. I bought this with a 91 Mustang included for parts if needed. My plan is to build it up for more of a performance oriented car to race but still be streetable.
Any help is greatly apreciated, thanks for the offer. |
Welcome to the club!! There are a lot of very knowledgeable guys on teh site to help out. Welcome to the madness!!:)
|
Did these come with any type of identification # on the frame or body?
|
manual
|
Joseph,
Thanks so much for the help. This is going to be a huge help. I know the origional owner had plans that were quite a bit different from the stock build as you can tell from the pictures. I took more pictures of the parts and put them here... http://s253.photobucket.com/albums/h...kit/?start=all . Email sent. |
yep that is a streetbeast, no doubt
|
| All times are GMT -7. The time now is 10:37 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: