Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Arizona Cobra's (http://www.clubcobra.com/forums/arizona-cobras/)
-   -   dumb assed question (http://www.clubcobra.com/forums/arizona-cobras/104395-dumb-assed-question.html)

mikiec 05-08-2010 05:07 PM

dumb assed question
 
Water pump for a ford 302 has a backing plate. Does this plate need gaskets on both sides? One gasket for the timing cover side and another for the pump.

Mike

Rick Parker 05-08-2010 05:17 PM

Absolutely!

OZCOBRA 05-08-2010 06:06 PM

Mike,

You would be a DUMB ASS had you not put a gasket on ,the fact you asked the Question points to the fact you are a Wise man!!!... there is no such thing as a DUMB question!! :)

Finallygotit 05-08-2010 08:46 PM

Quote:

Originally Posted by rick parker (Post 1049567)
absolutely!

x2............

tin-man 05-08-2010 10:43 PM

Quote:

Originally Posted by OZCOBRA (Post 1049572)
Mike,

You would be a DUMB ASS had you not put a gasket on ,the fact you asked the Question points to the fact you are a Wise man!!!... there is no such thing as a DUMB question!! :)

Not only a Wise man, but a fine Upstandin Gent too. tin-man:LOL:

mikiec 05-08-2010 11:30 PM

Good...

Now that I know I did it correctly, I can install it.

Mike

Doug I 05-09-2010 01:33 AM

Just make sure that you put the correct gasket on the correct face of the plate. They are marked 'inner' & 'outer' so you should be right.

Car Nut 05-09-2010 10:21 AM

Quote:

Originally Posted by Doug I (Post 1049630)
Just make sure that you put the correct gasket on the correct face of the plate. They are marked 'inner' & 'outer' so you should be right.

Kind of like belly buttons. :3DSMILE:


All times are GMT -7. The time now is 08:15 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: