Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Arizona Cobra's (http://www.clubcobra.com/forums/arizona-cobras/)
-   -   Autometer 'Cobra' Gauges (http://www.clubcobra.com/forums/arizona-cobras/116721-autometer-cobra-gauges.html)

Maricopa 08-08-2012 12:14 AM

Autometer 'Cobra' Gauges
 
Freakin' needles have fallen off both my oil pressure and water temp gauges. AM will take 'em back for fixin' (3 week turnaround) or I can buy new ones. Thought I'd check locally first to see if anyone has old or unused ones. Both are mechanical and look like these'uns.

Google Image Result for http://d5otzd52uv6zz.cloudfront.net/group-23efd228-e308-49de-b882-dbc6c64bcc4e-350.jpg

Danr55 08-08-2012 05:08 AM

Sorry Mike, I have some Smith's gages, but that's it.

4into4 08-08-2012 06:43 AM

The guys who bought my previous FFR swapped gauges, and I believe still have my old Autometer gauges ( mech. oil press, I think the water temp was electrical ) If they still have them, they could probably get them out to you from Ca. in less than a week ,and cheaper than new. Email me if you're interested ( f5cobra@live.com ) and I'll put you in touch with them.

Maricopa 08-08-2012 07:22 AM

Email sent, thanks!

Gracias Dan, but if I wanted broken gauges I would have bought British ones to begin with! :LOL:

Scotchman 08-09-2012 07:47 AM

Mike,
I've got a clock I'll trade out for some T's. It's the standard clock that came with the FFR kit.

Karl Bebout 08-09-2012 08:38 AM

I've got almost a full set of SW white on black gauges if you want to change out all of them. The tach died but everything else works fine.

Maricopa 08-09-2012 08:45 AM

Got a clock and it works, well most of the time. I still have a few AZCobra Ts and sweats. Drop me a line.

Thanks Karl but even with the chitty quality I want to stick with the original look.

mikiec 08-09-2012 07:43 PM

Mike what size T's and Sweats?

mikiec 08-09-2012 07:45 PM

Did you bang on the dash like Don?

Maricopa 08-10-2012 07:22 AM

Not sure what sizes, I'll have to dig through em.
Didn't bang the dash with a hammer, just tapped 'em with my (evidently) mighty index finger because they would stick if it sat for even a few days.

Got some help from David's source and have an entire used set coming my way. Anybody that needs a tach, speedo, volt or oil temp let me know.


All times are GMT -7. The time now is 02:19 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: