- -
Phoenix Machine shop
(
http://www.clubcobra.com/forums/arizona-cobras/117530-phoenix-machine-shop.html)
| HarleyD |
10-02-2012 05:28 PM |
Phoenix Machine shop
Hi All,
I'm new to the Phoenix area and am looking for a "reasonable priced" machine shop I can trust ( hard combination!). I have seen a few like 5 star and Phoenix Engines, but then I have seen a few complaints about them as well.
Any Suggestions Appreciated!
Thanks
|
| Danr55 |
10-02-2012 08:09 PM |
WHat kind of machine work do you have in mind?
|
| HarleyD |
10-02-2012 08:48 PM |
The motor in the car now is an old 302 that has a few issues. I thinking about getting a full rebuild and putting a 331 stroker kit in it. I figure if I can bullet proof the bottom end on a budget, I can come back later and put some nice heads on it when I have the cash.
|
| Danr55 |
10-03-2012 06:19 AM |
Check with Charlie at Hot Rods by Dean. He has a hook up with Mach Development in Maricopa who do pretty good work.
|
| Car Nut |
10-03-2012 09:57 AM |
Standard Machine in Glendale has a lot of experience with building stroker motors especially small Fords.
Did my 347 and it's top notch. He had been around for at least 30 years that I know of and has done a lot of work for me.
Ask for Roger.
|
| ItBites |
10-03-2012 11:03 AM |
I have used Basko (more recently) and Chuck's Speed Center (years ago). I had good luck with both. Your mileage may vary.
|
| HarleyD |
10-04-2012 02:38 PM |
Thanks for the information I'll check them out!
BTW, just found out about the Pavilions on Saturdays, Do any cobra guys go to this?
|
| hinoonaz |
10-04-2012 03:35 PM |
When the Temp drops at least 10 degrees. Lots of cars either way.
|
| Mike Brasfield |
10-07-2012 04:05 PM |
Basko is good so is B&B in Mesa
|
| All times are GMT -7. The time now is 12:36 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
