|
Caster Sleeves for FFR
A while ago I inquired about my twitchy power steering and was advised to up my caster settings from 3 deg to 6-8 deg. My adjustment arms on the upper control arms would not safely allow this much movement without exposing too much thread.
Several people advised me to get longer sleeves for the adjustment bars. I ordered the wrong size sleeves (small I.D.) and need to buy larger I.D. ones. Unfortunately I have lost the original thread to this discussion which advised the company(s) to buy them. I checked with JEGS, Summit and Speedway but no joy there. Suggestions? Thanks, Bill |
Try SPC Performance.
Hank |
Bill....I have heard of guys using a value to control the amount of fluid supplied to the PS unit. Like the rear brakes???
|
I got mine from Speedway and they worked fine on my FFR.
Will any of these work? A Arm Sleeve - Speedway Motors, America's Oldest Speed Shop Here is a thread that might help. http://www.ffcars.com/forums/17-fact...r-warning.html and another http://www.ffcars.com/forums/17-fact...h-threads.html Good luck! |
As Hank said, you can get them from Specialty products. You can buy complete new arms if/when you need them. Those racing style bushings do wear out fairly quickly.
Specialty Products Company | SPC Alignment | The Automotive Alignment Leaders Check page 114 of the catalog. |
There is another post which might interest you just put up on FFCars.
UCA adjuster galling - FFCars.com : Factory Five Racing Discussion Forum |
| All times are GMT -7. The time now is 01:58 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: