Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Arizona Cobra's (http://www.clubcobra.com/forums/arizona-cobras/)
-   -   Factory 5 roller (http://www.clubcobra.com/forums/arizona-cobras/22522-factory-5-roller.html)

Jason Lee Nye 12-26-2002 11:10 AM
Factory 5 roller
 
I have decided that I want to build a Spec Racer without any doubt. Now I have been toying with the idea of pulling the engine, tranny and NOS out and leaving the suspension, wheels and axle. How much could I get for it as a roller? Just toying with the idea and getting some feedback as to what I might expect to get for a roller? I will be using the engine and tranny in the spec racer anyway.

Jason Lee Nye 12-26-2002 12:52 PM
37 views and no feed back?

xlr8or 12-26-2002 12:57 PM
Depending on the Paint I would guess about 15-18K.


Scott

Jason Lee Nye 12-26-2002 01:46 PM
any spec racers in AZ?

mikiec 12-26-2002 02:46 PM
15 to 18 for a roller......??????

Yes, there are other spec racers here in AZ. Gordon should be able to tell you more. I only know of 2. They are not setup for the FFR spec racing series.

Mike

Jason Lee Nye 12-26-2002 03:07 PM
Mike why the ?????


What do you think for mine as a roller if I keep the engine, transmission, drive shaft, radiator and fan and exhaust set up?

mikiec 12-26-2002 03:42 PM
Jason,

The question marks meant that I was guessing on what it might be worth.

My guess is it might be easier to sell the car complete.....Then start fresh.

Mike

Jason Lee Nye 12-26-2002 03:48 PM
Just keeping the options open. As for keeping to specs for the Spec Racer races not worried at this point. Would be a couple of years before I could entertain that idea. So I might just go with a supercharger and getting rid of the nitrous and have fun taking it to racing events around here. If I get serious enough and want to travel and race I can take the supercharger off. Hmmm the Explorer could always use one!

I am curious if the MVD will sign off on it if it has the small racing windshield?

southernfriedcj 12-26-2002 03:53 PM
Jason, if I were you I would put the car up for sale inact and offer to sell it less the drivetrain at a reduced price. Example:23k complete/18k rolling
I am not suggesting prices, just a marketing strategy.

Jason Lee Nye 12-26-2002 03:57 PM
I am throwing the roller option out there if there is a buyer looking to go with a different drivetrain but doesn't want to build their own. They won't be limited to what is out there. I'll just invite my friend Denver over and we can yank the engine and everything out over the weekend.

casaleenie 12-26-2002 05:41 PM
Jason,
Tomorrow I'll try and put you in touch with someone who can answer some of your questions... He is currently building a spec racer and has some definite opinions on price and components..

Jason Lee Nye 12-26-2002 05:45 PM
sounds good


All times are GMT -7. The time now is 06:50 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: