Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Arizona Cobra's (http://www.clubcobra.com/forums/arizona-cobras/)
-   -   building the body buck this weekend (http://www.clubcobra.com/forums/arizona-cobras/38628-building-body-buck-weekend.html)

Jason Lee Nye 02-12-2003 03:35 PM

building the body buck this weekend
 
Well after walking around my backyard I think I will be safe putting the body on the side away from the golf course and putting foam and plastic over the top. The foam will protect from the golf balls. I live on a par three. The house will protect in a line drive case and the foam from the ball coming straight down.

I have even found golf balls in front of my house. Some golfers should not be golfing that is for sure. How hard is it to hit a 9 iron or sand wedge?????? I mean I suck at golf but not that bad!

mikiec 02-12-2003 04:19 PM

Jason,

Be careful building the buck.....You do not want to be known as fingerless boy....:3DSMILE: :3DSMILE:

Mike

Remember...while you are building the new take out the old once in awhile.

Jason Lee Nye 02-12-2003 04:28 PM

You do know I remodeled our house. Granted I didn’t lay the tile. I had two herniated disks at the time of remodeling. I could only do so much and the tile was the line not to cross.

My favorite tool is the saw!

Now you have jinxed me!

mikiec 02-12-2003 04:39 PM

Just to let you know....

I still have problems deciding which end of the hammer I'm supposed to use. As far as a saw..I have not found any yet that will cut a straight line.

You are a better man than me Gunga Din

Mike

Jason Lee Nye 02-12-2003 04:45 PM

A wise man once told me, "Man who cut without chalk line cut a crooked line."

azguy2000 02-12-2003 04:54 PM

what ever happend to measure twice cut once?

Jason Lee Nye 02-12-2003 04:56 PM

A foolish man will "wing" it, a smart one will draw a line that is to be cut.

mikiec 02-12-2003 10:36 PM

I use a line...It's just that the saw will not follow it.

And don't get me started on why every nail I hit decides to bend.:3DSMILE: :3DSMILE: :3DSMILE:

Excaliber 02-12-2003 10:38 PM

,,I cut it twice and it's still to short....

Ernie

Jason Lee Nye 02-13-2003 09:14 AM

Quote:

Originally posted by mikiec


I use a line...It's just that the saw will not follow it.

And don't get me started on why every nail I hit decides to bend.:3DSMILE: :3DSMILE: :3DSMILE:


Age could be a factor????? he he he


All times are GMT -7. The time now is 07:36 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: