|
Those that have, Those that will
This morning, while taking a drive from Tucson to Phoenix my license plate mounting bracket decided it didn't want to be attached to the Cobra any more. As a result I'm now minus one bracket, one license plate frame and one license plate. Is there someone out there who has a better idea about attaching the plate to the car and not using the factory five beer can material? Monday will start the great adventure with the state of Arizona to get a new plate.
|
Enzo at www.cobraaccessories.com has several different brackets to mount license plates.
|
Bill, this is a fairly common problem. The Phoenix guys have experenced it. Mikec and a few others are at Knotts right now. I'm sure that when they get home they will have an answer for you. This happened to one of them last year enroute to Knotts. John
|
Bill,
I made a new bracket using a piece of 1X1/4 inch aluminum stock. I cut it to length, drilled 2 holes to mount it to the body. Counter sink the holes. The holes for the lic plate I drilled and threaded. Works like a charm. Paul did the same. The process took about 10 minutes. No more breakage. The stock came from Home Depot. John, did not make the trip to Knotts this year. We did however, send 10 Cobras and one GT40 to Knotts. Mike |
You could take that second plate which the Arizona MVD sent you and attach it to a new ERA. They have much better license plate retention, even at the higher speeds which the ERAs can attain. :3DSMILE:
|
New plate and bracket are installed. It will take a weapon of mass destruction to remove it next time.
|
| All times are GMT -7. The time now is 04:50 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: