|
Dyno place in metro Phoenix?
Hi All,
I'm looking for a good dyno place in metro Phoenix to do some tuning. I'd like to find a place that can monitor A/F mixture in both exhausts as I have a separate exahust for each cylinder bank. Also looking for a place that knows to abort the run if the engine leans out. Any suggestions from personal experience are greatly appreciated! Thanks in advance, DM |
Phoenix area Dyno Tuner
Bob Ream @ B & R Automotive
602-272-6474 |
Chassis or engine dyno?
For chassis dyno: Pro Dyno can do this sort of thing. Not too sure about two O2 sensors (however if you're carbureted, with open plennum manifold, side to side differences should be minimal). I have a friend that has his pro miata there every so often. Just make sure the normal dyno operator will be there. Sometimes there is a younger guy who doesn't know as much and has trouble. For engine dyno: Basko Engine Service. Jim Basko is first rate and does another of my buddies' blown alcohol dragster motor. Years of experience... Good Luck |
Quote:
I called ProDyno at noon today (Friday) and just got an answering machine. I left my name, number, a message and never got a call back. Hmmmm... Customer service means a lot to me and not getting a call back left a bad taste in my mouth. I called B&R. Very friendly people. Both dyno operators will be on vacation next week so it will be a while. They quoted $175. I'm in no hurry on this so please keep the suggestions coming. Thanks guys. |
I use Dyno-Comp on Raintree in N Scottsdale. I have found them great to work with, excellent equipment, and very real numbers as compared to some others I have seen.
|
Chassis Dyno and Enghine Dyno
all text all text There are other dyno's in town too. Chuck's speed shop on 7th Ave south if Camelback has an excellent Chassis dyno. Call Lance there.
Mach Development on the west side is a sprint car motor builder and he has an engine dyno. By the way Mach development builds Bob Ream's son's motors. He's very good and very accurate |
Chasis Dyno
Street Flight in Tempe
Keith 480-615-4366 He has a O2 sensor and I have my car there twice. His drum is in the ground, and you get to drive (?) the car so if you hear any sound you dont like you can shut her down. very Cobra friendly. Keep it above 100........... Brian |
Anybody have any experience (good or bad) with Automotive Diagnostic Specialties? They're at 6835 W. Chandler Blvd (between between I-10 and Kyrene), 480 961 8704.
As part of their $150 dyno service they weld in a bung upstream of the cats which is where I've heard A/F measurements should be made. None of the other shops mentioned above seem to do this. |
You have cats? Get a dog instead, no welding required :)
Seriously, what are you tuning that has cats? |
| All times are GMT -7. The time now is 12:05 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: