|
I really, really, really need a 4 into 4 header.
Hi guys, I am ready to start putting my Cobra back together, however, I need a passenger side 4 into 4 header. It can be coated or plain, new or used. I need it to fit a 302 and FFR body. Give me a call at 520-825-9197 and I'll come to your place and pick it up. Also, if anyone has some left over press-on bulb seal from their FFR kit I would like to buy it, anything over 12" is fine. Thanks, John
|
John, I think I have a pass header for you.
You can buy that bulb seal from any upholstery supply house or from mcmastercarr.com |
Gordon, let me know if you have that header and I'll be up there. The bulb seal that I have found at the local shops is 1/2 the size of what FFR uses. Thanks, John
|
John, found the header. Give me a call at 520-494-2745.
|
What this am ??? :confused:
"press-on bulb seal" . |
Before the body is installed there is a bulb seal the goes from the aluminum to the body to seal everything off. It is basically like the seal material in the doors of your everyday street car.
|
another mismatch....
I also have a mismatch, I have a ceramic coated set one with a four into four and one is a four into three.
Anyone else have a mismatch that might want to correct a pair of sidepipes..... |
Gordon had a passenger side 4 into 4 that I needed. I am now on my way to getting the Cobra on the road once again. For Arizonacobra, if you need a driver's side 4 into 4 header I have one. John
|
| All times are GMT -7. The time now is 09:26 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: