Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Arizona Cobra's (http://www.clubcobra.com/forums/arizona-cobras/)
-   -   Just want to say Hi. (http://www.clubcobra.com/forums/arizona-cobras/96765-just-want-say-hi.html)

China 05-07-2009 05:50 PM

You're one sick puppy Bob. %/

China 05-07-2009 05:54 PM

Darnit!!!! my driveshaft is done, but they're closing in 10 mins. Looks like I don't get to try it out till tomorrow :(

Danr55 05-07-2009 10:54 PM

A girl friend once asked me who I was going to satisfy with that short driveshaft. I told her, "ME!".. It works.

RedSnake351 05-07-2009 11:04 PM

Quote:

Originally Posted by China (Post 947025)
Wish me luck :JEKYLHYDE


Wish you LUCK!

AZ Pete 05-08-2009 12:44 PM

China, did ya get it done yet? You able to get ice cream tomorrow? I know you only have a few tools so do you need to borrow a crescent wrench?
Pete

China 05-08-2009 01:04 PM

Hey Pete

I went by to pick it up this morning.... one look and I knew it was WAY too short!!! they shorten it an inch too short!!! So they're redoing it right now. She said it should be done by 1:30pm. (In 1 1/2hr) so check back in few hours and I'll let you know what happen.

Tools? thanks for the offer, but it's just the driveshaft, I prefer finger tight :)

John-Tucson 05-08-2009 01:20 PM

Hi China, welcome to Arizona. You are just in time for the summer driving weather. I thought that the driveshaft was suppose to be 10" ??? Hope that you can get it fixed, if not, come on along in your Detroit iron and meet everyone. Hope to see you tomorrow. PS. As an innicent bystander you see how the Phoenix guys act around ice cream.

China 05-08-2009 01:55 PM

pre 93 5.0 w/t5 = 11"
94 - 95 5.0 w/t4 = 10.375"
4.6 w/t45 = 13"

Bob Broberg SPF667 460BB 05-08-2009 03:55 PM

pre 93 5.0 w/t5 = 11"
94 - 95 5.0 w/t4 = 10.375"
4.6 w/t45 = 13"
Danr = 2 "

Just helping out here

AZ Bob

dave from mesa 05-08-2009 06:20 PM

Quote:

Originally Posted by Bob Broberg SPF667 460BB (Post 947448)
pre 93 5.0 w/t5 = 11"
94 - 95 5.0 w/t4 = 10.375"
4.6 w/t45 = 13"
Danr = 2 "

Just helping out here

AZ Bob

:LOL::LOL::LOL::LOL::LOL::LOL:
Kinda weird that you know, BOB. :eek:


All times are GMT -7. The time now is 11:05 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: