Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Arntz/Butler Forum (http://www.clubcobra.com/forums/arntz-butler-forum/)
-   -   Questions about Arntz/Butlers (http://www.clubcobra.com/forums/arntz-butler-forum/72705-questions-about-arntz-butlers.html)

bad venom 09-10-2006 10:19 PM

Questions about Arntz/Butlers
 
I am rebuilding a Arntz/Butler and have many questions about the body, streering colunm, and many other things. I'm in the process of reglassing the inner body parts as they were removed by the previous owner. The problem I have is I have no pictures or info on the footbox and how it is glassed around the support bar that holds the doors. Any info anyone? thx

big-boss 09-13-2006 09:43 AM

What do you need to know exactly? You can call if you want, Bill Sario 559-592-5315, CA. I built one and know quite a bit about them. My friend is still working on his. Good Luck.

Tom Howland 09-13-2006 01:19 PM

Bad Venom,
Here’s a picture of the right door post with the foot box bonded to it. The foot box is all one piece with large radius corners.
http://webpages.charter.net/howley23...htDoorPost.jpg

Steering rod attachment to foot box.
http://webpages.charter.net/howley23...dAtFootbox.jpg

MGB turn signal.
http://webpages.charter.net/howley23...ColumnLeft.jpg

MGB turn signal, my next project is to replace this with a VW unit with a high beam switch.
http://webpages.charter.net/howley23...olumnRight.jpg

bad venom 09-13-2006 08:43 PM

Thx Tom for the pics and info. Could you send me a picture how the right door post and the cover mate.. And do you know if butlers use a heater? and if so, where can I get one. I also posted some pics of my Cobra and the problems I am having.. Thx Dave..

Tom Howland 09-14-2006 08:22 AM

Dave,
It’s really neat to see all of your parts during the build stage. I bought my car completed.

At tip of screwdriver, fiberglass tub (footbox) is inboard of the post. The glass is also inboard of the 60’ angle brace forward of the post.
http://webpages.charter.net/howley23...stAndGlass.jpg

At tip of screwdriver, tub is closer to body to form a recessed area for the fuse blocks which are hidden behind carpeting.
http://webpages.charter.net/howley23...ostAtGlass.jpg

The glass in back of the post extends to and bonds with the body and goes all the way to the door sill.
http://webpages.charter.net/howley23/TubBondToBody.jpg

I may do a heater in a future project. I assume the general use of MGB parts in these cars would include the heater.


All times are GMT -7. The time now is 08:07 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: