Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Wind Wings and Visors (http://www.clubcobra.com/forums/australian-cobra-club/102656-wind-wings-visors.html)

Sloth 02-08-2010 08:07 PM

Wind Wings and Visors
 
After finally getting my wipers going satisfactorily, i am now going to attack the wind wings and sun visors. When i bought mine, Ian did not drill any holes so I have blanks of both visors and wings and some mounting hardware. My question is: Is there any templates available to get the position of the holes correct? I have the holes in the windscreen, just not in the plastic visors and wings.

With a bump steer kit also on the way, I am about to get REAL serious.

boxhead 02-08-2010 08:11 PM

Sloth, it might be best to mount the hinges on the screen frame, then offer the visors to the hinges and mark them where it is appropriate?

I would centralise the visors and mount the wind wings so they have a full range of movement (mine came pre drilled but my wings hit the body work before they swing back flat)

Sloth 02-08-2010 08:18 PM

Thanks Boxhead. Does it matter which way the hinges go? i.e. should the flat piece that attached to the visor face up and attach to the underside of the visor of face down and attach to the topside of the visor (assuming the visor is parallel to the road)?

boxhead 02-08-2010 11:43 PM

On mine I have the flat at the top, this allows the visor to fold down flat against the inside of the creen.
If you fit them the other way around it will hit the hinge before it folds half way down.

Sloth 02-09-2010 12:47 AM

thank you!


All times are GMT -7. The time now is 06:20 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: