|
Well done mate. When are you next down at Kenmer? I'll try to drop in.
|
Booked in for RTA inspection next Thursday 20/5/10. Papers went in 8 weeks ago.
Baz |
Hi Ben. Did you have any trouble passing emission test. if not, what exaust system did you use. Im thinking i might freshen up the 5.7 before i have to do the test.
|
I had no problems but i did not do the im240 test,but vic roads did require extra info about my cats,mufflers plus photos before they issued the vin.This was on top of the original info the engineer sent.I have a contact if you are chasing any exhaust bits
|
Hey Ben. Good to hear it all went smoothly. Any chance your contact has some cheap VZ/VE cats lying around?
|
VIN tags.
Guys, in West Aust. mine took less than 24 hrs. Faxed off the application one afternoon to DPI Engineering Div, and I got a fax back the following morning. !!!!!!!!
I too was shocked, but dont knock it. The licensing part at the pits made up for it. Had to go back 3 times to get my RMC licensed a couple of weeks ago. 5 hrs in the queue the first time, 5 hrs the second time and about 10 seconds the third time. anyway, all licensed now, so another one on the road in WA. |
thanks Ben. who was your engineer?
|
I used Enklemans,Bernie is a helpful guy and understands what we are up against.
|
Rego
Benny,
Well done, its a great feeling to put the plates and sticker on. I had to pay mine again a few weeks ago, sh$t how time flies. Drive it and find out what rattles and pissed you off before you start painting and the trim process. my 2 cents worth. STIFFY |
We don't do stickers here in WA anymore... Just plates!
|
Quote:
Baz |
Baz that sucks.
If the ADR's were to change before that inspection would you have to change? I am planning to get mine through before the ESC. If i get to the point you are at now and the ADR kicks in will i have to change? Sounds scary. I suspect that it will all work out, but it is a lot of money to gamble with. Liam |
Quote:
Baz http://www.clubcobra.com/photopost/d...nspection_.jpg http://www.clubcobra.com/photopost/d...307_KW_V8_.jpg http://www.clubcobra.com/photopost/d...eader_Tank.jpg |
Looks great Baz,
Must drive you crazy not being able to drive it. |
man that thing looks jacked up , is that its finished ride height, or are the wheels or the photography giving the wrong impression, [ nice finish]
|
Quote:
You have a PM. Baz |
I'm guessing it's jacked up to give adequate ground clearance with an under body exhaust. I had to lift mine up a bit to get legal clearance for rego.
|
Baz, I have a theory about such events that is based on pessimism, and not optimism. One is always surprised that way! I am sure that it will be on the road very soon. It is one of the best cars in the country.
|
Quote:
|
Quote:
|
| All times are GMT -7. The time now is 04:29 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: