Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   what lube in commodore rack ? (http://www.clubcobra.com/forums/australian-cobra-club/106106-what-lube-commodore-rack.html)

Rog246 08-10-2010 10:23 PM

what lube in commodore rack ?
 
What are people using to lube their commodore steering racks ?
Am about to fit mine after doing a full reco on it.any suggestions........that relate to the rack not me !! :LOL::D
rog

boxhead 08-10-2010 10:53 PM

Is it manual or power steering?
In either case I would use the black Molybond grease on the rack and pinion gear, also on the plasic bushes at either end of rack.
In the case of manual I would use the same grease on the pinion bearings.
I am strugleing to remember the power steer setup, I thought the pinion bearings where lubricated by the hydraulic fluid, but somewhere deep in my mind I am thinking the hydraulic assistance is sealed seperatly to the pinions.

Rog246 08-11-2010 12:53 AM

Its manual Box. was told that manual is a better option than power, so went that way.
So you're saying straight moly grease then. I can do that :D
Thanks
Rog

boxhead 08-11-2010 04:17 AM

It should have been lubed while being assembled, not after.

Rog246 08-11-2010 06:44 AM

yeah I did that, but going back to when I did up my Morrie Minor rack in the 60's I had to fill the rack with a heavy oil, and the rack that I got was pretty dry, so that's why the question %/

Rog

boxhead 08-11-2010 06:48 AM

I see, yep no oil in the newer racks

Rog246 08-11-2010 03:40 PM

well that answers that then & thanks again ;)

rog

RoyTheBoy 08-11-2010 06:15 PM

Quote:

Originally Posted by Rog246 (Post 1070665)
What are people using to lube their commodore steering racks ?
Am about to fit mine after doing a full reco on it.any suggestions........that relate to the rack not me !! :LOL::D
rog

Hi Rog,

What year is the rack from? I have just rebuilt my manual rack from a VB and used gear oil as per the workshop manual.

Hope this helps :-)

Cheers,

Roy

Rog246 08-12-2010 02:37 AM

I used a VK rack Roy.
What weight gear oil did you use ?

Rog

RoyTheBoy 08-14-2010 01:08 AM

Quote:

Originally Posted by Rog246 (Post 1070887)
I used a VK rack Roy.
What weight gear oil did you use ?

Rog

Hi Rog,

My manual says to use 190-210mls of SAE 90 or EP 140 Gear Oil so I used 200mls (rack is narrowed by 105mm) of Castrol LSX 90 Gear Oil.

Cheers Roy


All times are GMT -7. The time now is 02:03 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: