|
And ... just ta make ya happy Mr. Tenrocca sir ....where that L76 is sittin was once occupied by a 302W, Word series heads, a very nice crane cam with a world series T5 behind it.....and it bluddy fitted.!!!!!!!!
And ... that 302 was in that chassis for 6 years....... then I changed to the ch .... che ..... koff .... gasp ... GM. Aren't ya proud wot I did? :) |
For my L76 I used Ford clevo mounts. I was advised to add the bit of angle iron to prevent engine roll, sort of a mechanical stop. The chassis had hollow bar already welded on to accept some other sort of mount, I just had to extend them 1/2 inch or so to fit snug in the clevo mount.
I will replace the 50mm flat bar bolted to the engine with a plate that uses all 5 holes on the block. I reckoned that I would be able to get clevo mounts at any corner store if they needed replacement by the roadside and that upgraded mounts would be readily available also. As far as experience with them goes,,,,, I can only say the engine never fell out on my 200 metre test drive. http://www.comdotau.com/images/mount.jpg |
| All times are GMT -7. The time now is 12:18 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: