|
Plackard Placement
My engineer has given me 3 plackards to install before my inspection for Rego.
One's OK on the dash but I was wondering where the other 2 for rims and tyres were being installed by guys out there that had passed their test. I know they normally would go inside the door opening but I don't seem to have any room. If someone has any answers please post some pic's if you can! While your here could you let me know how many of you removed the dash plaque and dashpad after achieving rego. Regards. |
Both of mine are in the door panels Mando. Nothing on the dash. Rego authorities were happy with that.
http://www.clubcobra.com/photopost/d...oor_panel3.jpg |
Hi Mando, I put my tyre placard on the door itself near the latch as the CR doesnt have a thick dor sill like the Harrison. Rgds Gregg
|
Mine is in the boot, on the left hand (passengers side) rounded section of inner wheel arch.
|
Mando
Mine were on my desk at home at time of inspection, Vicroads were only interested that numbers matched and that I paid the appropriate fees. However I have heard your SA vehicle agency is a tad more a##l but I'd still suggest laminating the plackards and attaching temporarily until you decide on a better option. When did you last look at the tyre plackard on the Territory? |
Hi Mando On the tyre plackard made it small and put in glovebox {business card size.} It pass ok
|
Thanks guy's, I should be able to work something out from here. Merv, yours looks great but I don't have as much room as the Harrison kit. I'll see if I can fit them around the latch area as Gregg suggested. I like the idea of the glovebox if I had one, it might end up in the boot after all.
Hi Steve, I'm not doing any more jobs 2 and 3 times. They're going on and they're not coming of !!! Regards. |
I put mine in the glovebox...not that they looked for it.
|
laminated and in the glovebox, the inspector asked to see it and was happy
|
Just realised, Mando if your asking this question, then you must be close?
Trip to Nationals? |
Getting closer everyday Boxhead.
Regards. |
| All times are GMT -7. The time now is 01:28 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: