Club Cobra
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Jag Rear End-Width (http://www.clubcobra.com/forums/australian-cobra-club/114086-jag-rear-end-width.html)

jcraigau 02-19-2012 05:13 AM
I don't have the hubs on yet, but tip to tip on the axles is exactly 56 inches.

The G-Force has the options of having the rear arms cut down by around 100mm. I've shined a torch down the tube and there is about a 5mm sleeve inside where the cut is.

http://i839.photobucket.com/albums/z...ra/JagRear.jpg

Route 66 02-20-2012 10:09 PM
Jag Rear-End
 
Quote:
Originally Posted by jcraigau (Post 1176678)
I don't have the hubs on yet, but tip to tip on the axles is exactly 56 inches.

The G-Force has the options of having the rear arms cut down by around 100mm. I've shined a torch down the tube and there is about a 5mm sleeve inside where the cut is.
Hi jcraigau,

The drive shafts are awesome and obviously aren't going to be a weak link - they are like drive shafts. I'd like to see my car even just at at that stage. Various Hotrod forum links I have seen show extra flanges welded to the inner yokes of the LCA's to stiffen and strengthen them. This does seem to be worth looking at esopecially with most Cobras and my DRB not having a radius arm. DRB offer a Watts link option welded to the top of the Hub that I have seen on other forums that at least goes some way towards stabilising the lCA/Hub under power and braking.

I am really keen to get the suspension hooked up so I can nail down the offsets/backspaces once and for all so I can sort my wheels out. and tick one more box!!!

Regards



Route 66

justcobra 07-22-2012 01:41 PM
I got two Jaguars which are available for wrecking.
Both are V12 and they are Series 2 and 3.
I will be using one IRS which will be used on RMC Ac cobra ground up build and the other is available for sale.
Prefer to sell the whole car and you take your pick.


All times are GMT -7. The time now is 07:33 AM.
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: