- -
Rear reflectors
(
http://www.clubcobra.com/forums/australian-cobra-club/117523-rear-reflectors.html)
| muzzza |
10-02-2012 05:29 AM |
Rear reflectors
Can not find anything in ADR's to indicate minimum size for rear reflectors...............can anyone help ? Muzzza
|
All I can find is that the reflective surface must be no smaller than 25 sq cm
|
| Clois Harlan |
10-04-2012 06:45 AM |
Your tail lights are reflective and either the two single round tail lights or the rectangle tail lights will meet the 25 cm requirements. Of course there is also an option that none have installed yet: A triangle with equal sides of 12" X 1/2" with white and red reflective material on it. Often seen here in the states on some of the Amish Kit Cars. :)
|
| Rob. Smith |
10-05-2012 04:57 AM |
Clois, You don't know the Australian Design Rules...they are very specific BUT very open to "interpretation". Then there is the argument with the authority about that interpretation. The signatory engineer does the arguing (and now wears the responsibility) So it's easier to comply with the written rules. Tail lamp reflectors are only good if they meet the European standard E2 (I could be corrected here) believe it or not it's connected with the United Nations agreements.
|
| muzzza |
10-05-2012 05:12 AM |
Rear reflectors
Thanks for your input Guys...........will run it by my engineer. Muzzza
|
| Merv and Sharon |
10-10-2012 04:00 AM |
Murray, the ones from Warwick are quite discrete and minimal.
|
| muzzza |
10-10-2012 04:10 PM |
Rear reflectors
Thanks Merv, I am not running rear over-riders, so can not use flat reflectors. Have since found some Mitsubishi Triton rear reflectors with a shaped mounting face. ............fits the car " Exacto-mundo " Muz
|
| boxhead |
10-10-2012 06:17 PM |
I bought some rectrangle flexable ones from SuperCrap, they had self adhesive tape on the back.
They fell off soon after.
|
| Merv and Sharon |
10-11-2012 03:57 AM |
Look forward to seeing that car Muz! I think we can sense a shed visit coming on!
That rear suspension work is neat in your gallery too
|
| macloft |
10-11-2012 05:38 AM |
Hello Merv
I sent u a message
Thanks
Bruce
|
| Merv and Sharon |
10-11-2012 01:52 PM |
Hi Bruce. Yes it does not show on the message frame here and when I try to respond to the email version via your address - it bounces back? I have replied twice.
I have also sent a PM to you now as well.
Merv
|
| aussiecoupe |
10-14-2012 03:39 AM |
reflectors
the reflectors will be 65mm in diameter . Narva or Hella have them . There is a ADR written on the package . I will email you a pic .
Warwick.
|
| All times are GMT -7. The time now is 03:48 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
