|
PS Pump fittings
Guys,
Probably should join an LS forum along the way but thought i'd start here. I'm looking for a -AN fitting for the KYB PS pump on my LS engine where the reservoir inlet normally sits. I've seen this item on car in a street machine mag, but cant find it anymore and cant find one on the usual sites and catologues, i.e. aeroflow, earls, proflow, russells, etc etc.... Anybody seen one somewhere? Otherwise its make one. regards Dave http://www.clubcobra.com/photopost/d...18_Custom_.JPG |
Dave,
The inlet is an o-ringed flanged fitting, obviously no threads in the pump. I'd say fabricate your own, using a steel AN fitting. The outlet is a banjo fitting, so it is already threaded in the pump housing. |
Hi Gary,
I've had it apart, and as you say, its a tube with an o ring seal. I probably will have to make something up, if i cant find something off the shelf. Dave |
Dave - If I remember correctly I just cut off the pipe bit and welded on a Steel AN fitting. All good - no leaks
Cheers |
Maybe try Speedflow at Speedflow - Manufacturer of Aluminum and Steel Hose Ends and Adapters - Australia they are based in Taree NSW. Local manufacturers (OZ)
|
try AGR Performance-MB Motorsports They use that pump as a basis for their racing pumps. They might have the fitting you need sitting on the shelf.
|
Thanks Rob, Bob, and Tenrocca.
I've got the speedflow cat, nothing in there specific to this, but they do have the weld ons as do some of the others. Looks like i'll be making something up. I'll post up my results in case any body else is interested, Dave |
|
| All times are GMT -7. The time now is 12:42 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: