|
Halibrand Wheels for sale
5 Attachment(s)
I have a set of Dragway DB51 wheels and tyres for sale off the GT40 if anyone is interested?
The tyres are brand new and the rims are several years old but in very good condition. These rims had slicks on them but rather than continually changing wheels i decided to put street slicks on my drive rims. Wheels are 16"x8" (225x50x16 tyres) front and 16"x9" (245x50x16) rear. Backspacing is 135mm front and 145mm rear. The tyres cost me $750 6 months ago and i'm asking $1,300 for the lot. I also have 2 polished Edelbrock mufflers for sale for $150 the pair. They were used on my Cobra for about 6 months and are in excellent nick. Cheers Dean |
I would probably take $1,000 for the wheels if there was anyone interested?
They would be a good cheap set for someone who is just getting started or has a limited budget. They are just taking up space so make an offer anyone? |
What stud pattern are they, do all gt40 kits use the same patterns
|
Good deal on the wheels/tyres! I swore that I'd only ever use 15" or 17" rims because of better tyre choices, but your price makes it tempting.
Are they Nankang on the front and Federal 595 on the rear? Re the mufflers, do you have the in/out diameters, pics or ideally part numbers? |
The bolt pattern is 5 studs on 4 3/4" (120.65mm) pcd (Corvette, HQ , Jag ) --common to DRBs not sure of others
|
Yes thanks Eve you are correct, they are Corvette/HQ/Jag stud pattern.
Hanoob, I'm not sure if all GT40 kit manufacturers use the above stud pattern but mine is a DRB and I think most of their kits used this pattern. Craig yes they are Nankang on the front & Federal on the rear. They were the best options available to fit the rims at the time. As you said there aren't huge options for 16" rims and both Nankang & Federal tread patterns are almost identical and thats why I chose them. Would've been preferable to match brands front & back but they couldn't supply the right sizes in one brand unfortunately. I'll get some photos and details of the mufflers posted as soon as I can get to them. Cheers Dean |
4 Attachment(s)
Some pics of the mufflers for those interested.
They are Edelbrock RPM series 2 1/2" centre in/centre out polished with dump pipes fitted. I took them off when i fitted live sidepipes to my first cobra and they've sat in the shed ever since. I'm asking $150 the pair. Cheers Dean |
Halibrand Wheels
Hi, I am interested in your wheels and tyres if they are still available, PM me with your phone number and I will have achat to you.
Thanks Craig. |
Hi Craig
I have sent you a PM with my details. Cheers Dean |
| All times are GMT -7. The time now is 03:45 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: