Club Cobra
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Wiring harness (http://www.clubcobra.com/forums/australian-cobra-club/121681-wiring-harness.html)

albanycobra 08-07-2013 05:01 AM
It's an awesome harness, I fit them to GT40's as well. I buy all my switches and extra's from them aswell, shipping is cheap.

Tonus72 08-07-2013 05:23 AM
Quote:
Originally Posted by sideshow (Post 1256090)
in an airoplane they never solder joins they always crimp
solder brings alot of heat into join and right after the join where solder ends
it becomes brittle
now most solder joins i see done by others are always overdone
just need minimal solder and minimal heat

anyway soldering can be bad due to very thin wire can break due to vibrations over time
right at end of solder in a car its not so bad
in a plane well u can end uo with 300 deaths and thats no good heheh

Thanks Sideshow. I did solder on my box trailer lights when I built it - nothing as critical as a plane!

Cheers

Tony

sideshow 08-07-2013 06:18 AM
soldering is ok even though people say not to sometimes u just have to
and if u keep join neat and not too much solder then its ok

normally only an issue when u use very thin wire like under 1mm sq and when its in a race car that revs over 10 grand which then causes bad harmonics that its an issue


All times are GMT -7. The time now is 08:43 AM.
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: