Club Cobra
Page 3 of 3 12 3
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   302 Windsor Engine (http://www.clubcobra.com/forums/australian-cobra-club/121909-302-windsor-engine.html)

Jaydee 09-15-2013 10:23 PM
Is the cover breather going just into the air cleaner? I don't want to run a PCV valve. I've installed a weiand manifold and 425 Impco mixer on mine. Should pass emissions with gas.
JD

Towmaster 09-16-2013 03:12 AM
Quote:
Originally Posted by Jaydee (Post 1263045)
Is the cover breather going just into the air cleaner? I don't want to run a PCV valve. I've installed a weiand manifold and 425 Impco mixer on mine. Should pass emissions with gas.
JD
The breathers go to a catch can which has a PCV valve that then goes into the manifold. I only installed that because I race it. Wouldn't be needed on a street car.

Towmaster 09-16-2013 03:15 AM
Yes Matt problem appears to be resolved. It's really hard to try and simulate race track conditions ... When ur not on the track..
Thanks again to my good mate 'Hank Hancock' for all his help.

spookypt 09-16-2013 04:27 AM
Good to hear mate....

Rossba 12-29-2013 03:49 AM
Quote:
Originally Posted by Towmaster (Post 1263019)
A pic of my little Windsor....

http://www.clubcobra.com/forums/pict...pictureid=6243

They can be made to look ok.

Running Autronic SM4 and 1,000 cfm throttle body. Now have an Accel dual sync Dizzy as the Ford based (Mallory) one couldn't cope anymore.
That looks like it should, awesome.
Well done

darkside 01-07-2014 08:34 PM
cant wait to clean up my engine bay ,yurs towmaster shows just how nice they can look ,I did manage to get rid of the mustang tbar shifter ,until I get the manual in it I did this for now so it gives it a sportier look
http://i802.photobucket.com/albums/y...pscceb50c1.jpg
...doc

Rossba 01-11-2014 03:52 PM
Good job on the interior

deano59 05-26-2014 09:43 AM
I have to admit I like the old school carby look myself just a personal thing some of the engine bays ive seen with injected engines just look so out of place and a night mare to work on . not having a go at anyones car just a personal point of view


All times are GMT -7. The time now is 06:52 AM.
Page 3 of 3 12 3
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: