Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Bumpers Overriders (http://www.clubcobra.com/forums/australian-cobra-club/122326-bumpers-overriders.html)

sevenohms 09-16-2013 04:57 AM

Bumpers Overriders
 
2 Attachment(s)
Hi,

I'm looking for some ideas on where to locate my bumpers and overriders.

My Cobra doesn't have the holes or the brackets. Can anyone take a few photos of where the holes and some dimensions on where they go? How does the front bumper mount to the overrider?

Nathan

renovationinnov 09-17-2013 03:08 AM

Nathan ive just done mine so I,ll send you some pics tonight

rob

David Hodgson 09-18-2013 12:07 AM

Just make sure the rear bar is not mounted too low. You want the top bar at least level with the boot handle or you run the risk of jagging the over riders on steep driveways etc. Especially on droopy ar$es like G/Force and RMC.

The front hoop has flat bar welded at each end which bolts to the side of the overider.

David Hodgson 09-18-2013 04:01 PM

Seven, have you got a rear bar yet? if not, I took some measurements off my bar last night. This was originally a DAX bar, not sure if they are all made the same.

Mouning hole centres are 790mm x 58mm
Mounting tube on bar 13mm I.D
Main bar pipe 25mm O.D
Upper mounting tube
centre from top of bar 35mm

So you would drill your top holes 35 mm below the highest point of your bar, and two more 58mm lower and 790 mm apart.

Holes should be large enough for the mounting bar and body grommets.

Hope that makes sense.


All times are GMT -7. The time now is 08:16 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: