|
Wanted, front brake calipers suit Robnell
I am looking to buy a pair of front PBR manufactured 89-96 Corvette type callipers that were used on the Robnell cars as std equip.
The car I bought earlier this year is missing these as well as the two disc rotors and a front knock off adaptor. However I did get an extra rear one instead. How this came about is unknown but could make a good story.:confused: I have been in touch with PBR with no luck as they were made but not sold here. Hopefully some one may have upgraded to larger brakes and may not need the original parts. Happy to pay cost and freight, thanks. John |
Try ebay.com. I got a complete C4 front end(non ABS) out of USA which I plan to use on my RMC project ilo of Series 2 Jaguar.
Corvette front ends are lighter than Jaguar. Complete front ends cost $US400 plus the usual landing cost including Steaming cleaning which was ordered by our Quarantine People.'$139 Budget for $AUD 1000 landed. PBR and Alcoa did supply The General PS I got brand new C4 lower and upper control arms. |
Hi John.
The other option on the robnell was the AP setup which would be better for parts and easy to fit. I can supply a drawing for the mount if you like. Do you have the disc hats or were you looking for the one piece discs ? Are you missing the L/H or R/H threaded hub ? |
Hi kyleb, I am missing the L/H threaded hub (front) and one piece rotor (disc) and have a L/H threaded rear hub (Splined) that is surplus. I hope that someone else is not missing that one for their car.
I would like to stay with the 15" knock offs and if the APs will let me I don't mind going that way. Its a pain having half a set, but there could be the other half floating around out there of no use to anybody. Thanks for your help so far and see what else surfaces. John |
John.
Check your PMs |
| All times are GMT -7. The time now is 03:02 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: