Club Cobra
Page 3 of 3 12 3
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Ford Ignition Probs (http://www.clubcobra.com/forums/australian-cobra-club/125345-ford-ignition-probs.html)

byroncobra 01-18-2014 10:34 PM
Quote:
you dont want a system that runs an airflow meter. Get one that will allow you to do a SD tune. airflow meters are ugly. then you can get a nice 4 barrel throttle body and a cobra air intake.
what like mine, where is that MAF........:)

cant fit the oval cobra filter though, not enough bonnet height:CRY:

http://www.clubcobra.com/photopost/d...119_100031.jpg

albanycobra 01-18-2014 10:41 PM
It's on top of the TB and restrictive.......:LOL:

oh and get rid of that fuel pressure gauge before your car burns to the ground.......

sideshow 01-18-2014 11:25 PM
I see that pro efi uses ls1 ls2 truck look alike coils
see everyone copies gm stuff cause its pretty good hehehe

Jaydee 01-18-2014 11:48 PM
Having worked for the RAA for many years, I have decided on a Mustang points dizzy. Retimed easily for LPG. And a Accell supercoil. On the bench it still produced a 1 inch fat blue spark, same as a electronic dizzy. If it fails, it can be tested easily. All this electronic stuff is great, until something goes wrong. Question sideshow. If the starter is turning over, then the block must be earthed?.
JD

Towmaster 01-19-2014 06:02 PM
Quote:
Originally Posted by byroncobra (Post 1281326)
what like mine, where is that MAF........:)

cant fit the oval cobra filter though, not enough bonnet height:CRY:

http://www.clubcobra.com/photopost/d...119_100031.jpg
Mine made 30rwhp by removing the maf and changing to Autronic ECU. The maf is only about 90mm and you need about 70mm or so in front of it of uninterupted air space. Hence the reason mine has a 3" air filter element on it.
By removing the maf my throttle body went from 90mm to 145mm...... certainly freed up the horses in the 6000-7000 range.


All times are GMT -7. The time now is 05:17 PM.
Page 3 of 3 12 3
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: