|
dash pads
just looking for a dash pad mould or if someone knows of who makes them
or if anyone has one for sale thanks rob :cool::cool::cool: |
just get a pool noodle and cut it down the middle
it would do the same thing plus also stop the dash from sinking if u ever drove it off a bridge hehe |
Talk to your engineer first. A pool noodle won't comply with density requirements if your state enforces the requirement fully. Also there are parts of the dash board that fall within the zone that requires padding, not just the lip of the body.
I used Eva 260 in 30mm. Not sure where you get it in Queensland but you could call some foam/rubber shops. |
| All times are GMT -7. The time now is 11:58 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: