|
Suspension Advice
Have been stalking on the forum for a while and finally making my first post. I have a DRB (1998) with old school 302. Recently had the 3 speed auto replaced with a 5 speed tremec. Finally feels like a real car.
The front ball joints need replacing, and before I go ahead and change them out, wanting to seek advice from more knowledgable owners, on what options I might have to improve the front end of the car. It runs the standard Torana arrangement. If possible I would like to upgrade the suspension to enable more adjustment if I ever get the urge to do any track work. Is there someone in Brisbane or near surrounds that I could take the car to for advice. Thanks in advance for your assistance. |
Go and talk to Scott Hampson,there's not much that he can't do....clever man.
Contacts Cheers, Warren |
Thank you. I happened to be in Warwick on Saturday visiting Mal Wood's workshop, and dropped in to the Cobra meeting at Morgan Park. Certainly inspired me to do more with my own car after seeing some great cobras at the track.
Cheers Greg |
John Austins old car ??
"Hoppers Stoppers" do a front brake kit for it Eurethane bushings for the front lower control arms Upgrade the rear end to a 8" C&P (commodore / ford) 3.45 :1 lsd with disc brakes. Mal can do all this if you wish |
I wasn't impressed with Hoppers Stoppers kits so made my own.
|
Why ?
|
Correct, it is John's old car. Been slowing improving on it. Mal recently put the 5 speed in, though the budget wouldn't stretch to the diff. With standard 302 at present, I doubt if I am producing enough horses to worry the banjo diff. But if I break it I will have to replace it.
Thanks for the info on the front end. Cheers |
If you have an LH front end you could swap the upper control arms for UC’s. The UC’s have an offset ball joint which allows more positive castor. You can also move the upper control arm mounting bolt about 18mm lower and have it in a slightly lower position than was in the A9X.
There is some good information here; Suspension Depends what model and what bits you’ve got... |
Thanks for the great information. Certainly alot of options to ponder.
|
Greg, if you're located on the southside of Brizzie, Sam at Pedders at Capalaba really does know his stuff.
As far as the Torana goes the best front end is from the RTS models, they actually handle pretty damn well.;) |
Thanks Rog,
I actually live in the Bayside area, so might drop in to pedders and have a chat. |
Thanks Rog
I actually live in the bayside area so will drop in to Pedders and have a chat |
Thanks Rog
I actually live in the bayside area so will drop in to Pedders and have a chat |
| All times are GMT -7. The time now is 03:40 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: