|
Harrison handbrake cables
Okay so I'm about to put the rear handbrakes together & I understand that I need to modify the handbrake cables.
Can anyone advise me what the changes are please.:confused: I am using the R33 skyline rear end. Rog |
Rog, I used R33 GTST rear end. Did not modify cables at all. Worked fine. Murray
|
Rog
I can't remember modifying mine either, but the bell crank needed to be cut and rewelded as did the mounts to work for me. Have you got all the handle, crank and cables bits from Cobra Kits? I'll stick my head under the car and refresh my memory...get back to you |
I seem to remember my cables being shortened by Warwick before the car shipped. I've since moved the handbrake to the top of the tunnel using a Lokar unit. Looks much nicer than the Commodore unit and it's no longer jammed in beside the tunnel and driver's seat.
|
Quote:
Geof |
handbrake relocation
http://www.clubcobra.com/forums/aust...ld-update.html
Gents this post from Paul has info on page 10 |
Thanks Doug. Geof, if I get a chance I'll put the car on the hoist tomorrow and take some photos underneath for you.
|
unno about Geof, buts that's going to help me too !
thanks Rog :cool: |
Sorry for the delay guys, here's a photo from underneath showing how the Lokar handbrake can be adapted for the Harrison. A section of steel plate is welded into the top of the tunnel with an elongated hole for the handbrake to fit through, plus four countersunk holes. See below for the rear section.
http://i376.photobucket.com/albums/o...psnfxsrmiw.jpg http://i376.photobucket.com/albums/o...psrf6pnpng.jpg |
Sambo
Great, thanks! Do you remember if you used the same handbrake cables? Very neat install. Geof |
Yep, original cables were re-used.
All credit goes to Marty at Kenmer Engineering :D |
Thank you Sir Sambo %/
I've just changed my mind on how I'm going to setup my hand brake. So Tar very much ;) |
| All times are GMT -7. The time now is 04:16 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: