Pace 427 ( Chassis No 37 for Sale )
 

My Pace 427 Starter / roller Kit and finishing kit is for sale.
Also LSA engine with 6060 MG9 gearbox etc. Chassis is 17" option. Body is black - upgraded.......... Send PM if interested. Murray

Perhaps a little more detail.

Pace 427 Roller kit as supplied by Pace . ( Complete ) 17 inch option. Upgraded body. 3.7 lsd

Pace 427 Finishing Add-on Kit as supplied by Pace.
Upgraded fuel supply for LSA.
Upgraded clutch feed / bleed lines.

No wheels. No seats. No steering wheel. No overriders. No bonnet scoop.

LSA crate engine, with starter alternator and serpentine belts fitted. GM controller kit.
Twin plate clutch. MG9 trans. With oil cooler.

Roller kit and Finishing kit owes me $59,000.00
Engine / trans etc as detailed above $17,000.00

Will look at all sensible offers.


I have also made an additional set of 6061 alloy suspension arms to suit late model Corvette rims, with 60mm less scrub at front and 120mm less scrub to rear.
Corvette rims and tyres. Will add a picture to indicate direction I was heading.

Reasons for selling are purely personal. I run my own building design business, which keeps me very busy. Beyond that.......just over the last eight years I have scratch built and raced a single seater hillclimb car. Spent a lot of time on a C4 Corvette, then a C6 Corvette. Built an enclosed race car trailer, an open car trailer, a Harrison Cobra and now starting a Pace car.....and a couple of renovations to our house along the way.

Would love to continue with the Pace car.........but time is the problem.
Need some of that time for other things. Murray

[IMG]http://www.clubcobra.com/photopost/d...0_x_1275_1.jpg[/IMG]

[IMG]http://www.clubcobra.com/photopost/d...49_x_1932_.jpg[/IMG]

Murray
Someone is going to jump the queue and get a well sorted Pace kit. No waiting on parts.Hope we still see you at the breakfasts
Cheers Jeff

Love the colour and wheel combination .

the finish on that body is just outstanding some one will score a great deal on this one .

.... and the shaved rear guards.

This was on the way to becoming one very special car.

What a pity that time caught up with Muz. :(

I was thinking the same..great but with all the parts ready to go...wheels look sensational, so mean and the black gelcoat...I would swear that's paint

Number Plate
 

I have a suggestion for the perfect number plate if available

BLACKAS

Cheers

Brad

Would love to see a side pic of this car sitting on it's wheels....plates should be BADAS

I cant see this lasting long. This really has the foundations for a seriously quick and outstanding car right there.

That wheel and tyre combo and the suspension changes will set that apart from the others.

Modern day retro supercar..... perhaps.

Great opportunity for someone..... for sure.

May separate roller kit / finishing kit / motor, transmission. Murray

PM sent Muzza, I might be able to help you out.