Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Ice Ignition - Yay or Nay (http://www.clubcobra.com/forums/australian-cobra-club/136947-ice-ignition-yay-nay.html)

LoBelly 07-19-2016 08:27 AM

Ice Ignition - Yay or Nay
 
Have been a long time user of Mallory for ignition components

MSD have taken them over and are currently supplying some replacement parts online but do not ship outside the US.
I learned all this having fried the electronic ignition module....

So it looks like a brand switch is inevitable.

and it appears there is a local mob

Innovative Ignition Systems & Components - ICE Ignition

Does anyone care to share experiences ?

thanks

LoBelly

BJ's Snake 07-19-2016 04:25 PM

Hi LoBelly

I have been using a Scorcher ignition system with no issues what so ever.
Local to you as well from Performance Ignition Services

Cheers

stiffy 07-19-2016 04:51 PM

Scorcher
 
LoBelly,

I had to drop my dizzy off yesterday to Scorcher for a similar problem,

Well I hope it is a similar issue. The coil exploded on Sunday and the RACV bloke

Said it was the dizzy module, it's only 18 years old so it probably needed a

birthday anyway.

I'll keep you posted

Stiffy

Trickycoupe 07-19-2016 06:12 PM

I have used Performance Ignition Services for parts, distributors - both conventional and EFI specific, custom leads, etc, on all my cars for years.

I cant recommend them enough and delivery to perth has always been very prompt.

Beejay 07-19-2016 08:39 PM

Ice is really well known and has a great reputation.

From memory they are widely used in the Engine master competitions in the USA.

Cheers,


Ben

Paintwerks 07-19-2016 09:21 PM

Myself, Guy and David Marsh all have ICE custom made ignition wires in our Pace Cobras. Great quality and fit. Highly recommended!

stephen low 07-20-2016 12:26 AM

Mickhail

Ditto +1 on Ben and Sime's comments.

I too had ICE make up my revised leads to suit the relocation of my coil packs to the rear of the engine.

The owner was good enough too to lend me a variety of plug ends to help decide what to use to best suit my set up and to help measure up the individual lead lengths needed.

Just dug up the receipt and I ordered 9mm Pro 100 series and they cost me $300 G inclusive.

Don't think you can go too far wrong with them and they are locally convenient mate!

Steve

cg514 07-20-2016 02:56 AM

michael at ice supplied my leads and ignition system then altered it to run the fuel injection
system 2 years later did not even charge me for the alterations on my gt40 393 stroker
i am very happy with the service and quality of the system
chris

Gaz64 07-20-2016 03:27 AM

I recommended and fitted an ICE system to a friends Mustang.

7 Amp Street Series Ignition Kit - ICE Ignition

Very easy to setup, super reliable.

750hp 07-20-2016 05:18 AM

ICE is world class. With the number of issues I've been hearing about, it seems like the quality control with Mallory and MSD isn't near the standard of ICE at the moment.

LoBelly 07-20-2016 05:42 AM

Thank-you Everyone for your comments,

As it happened I was in the area this-afternoon so stopped by to visit the factory.

The chaps were very proud and passionate about their products and also very helpful. The experiences described above were repeated i.e. Happy to make up lead sets to suit my routing preferences or to give me the kit to make my own - again with the offer of a variety of boots.

The Ice Men and their products impressed me so I will be giving them a go.

Will post some pics for those interested ( ...eventually)

ta
LoBelly

Rossba 07-23-2016 04:05 AM

ICE get very good recommendations on other forums so worth looking into.
MSD stuff is becoming unreliable a lot of people are finding

tamanaco 07-23-2016 05:49 AM

Quote:

Originally Posted by Beejay (Post 1399385)
Ice is really well known and has a great reputation.

From memory they are widely used in the Engine master competitions in the USA.

Cheers,


Ben

Yep...big on the Engine Masters comp. Did see there demo at the Performance Racing Industry show in Indy. Very impressive on how much more energy they send to a plug!


All times are GMT -7. The time now is 05:47 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: