Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Clutch master cylinder (http://www.clubcobra.com/forums/australian-cobra-club/140134-clutch-master-cylinder.html)

CMY-427 02-05-2018 01:27 AM

Clutch master cylinder
 
Does anyone know what the commonly fitted clutch master cylinder wouldve been out of that would've been fitted to a mid 90's DRB ?

stephen low 02-07-2018 02:23 PM

Probably a standard trailer type 5/8" master I am guessing.

Think that's where I started in my G Force

CMY-427 02-07-2018 08:39 PM

Thanks for the reply,

I'll just have to pull it out 1st and then try and identify it I guess,

Thanks anyway :)

BJ's Snake 02-07-2018 11:48 PM

Cranky Mechanic — Car repair in Kirrawee, NSW

Call this guy, possibly would have the answer for you.

Cheers

CMY-427 02-08-2018 09:12 PM

Thanks for that, I'll give them a call on Monday..

Rob. Smith 02-09-2018 05:24 AM

If it's out of the car .. pull it apart and measure the bore... DRB. Most likely a holden unit.

CMY-427 02-09-2018 11:22 AM

No it's not out yet,

I was hoping to get a clear indication of what it may have been out of ( I'm thinking something Holden too) and just buying one so as when I pulled the old one out I'd just put the new one back in,

I'll ring the guy in the link above on Monday to see if he knows, otherwise I'll just have to have it identified after I remove it..

CMY-427 02-11-2018 06:40 PM

Quote:

Originally Posted by BJ's Snake (Post 1437986)
Cranky Mechanic — Car repair in Kirrawee, NSW

Call this guy, possibly would have the answer for you.

Cheers

I just rang this guy, his contact details have changed but I managed to get his mobile number,

He couldn't recall what the master was out of but he did have an identical car to mine there and checked it for me,

It's a PBR unit so should be easily identified once I pull it out..

Cheers ..

stephen low 02-13-2018 01:55 AM

If its PBR I'm still going the simple trailer master option.

Looking up my parts list I used a Protex P4979 - 5/8", a Bursons sourced part.


All times are GMT -7. The time now is 07:36 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: