Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Does anyone Recognise the origons of this Chassis (http://www.clubcobra.com/forums/australian-cobra-club/144482-does-anyone-recognise-origons-chassis.html)

pocoaust 02-12-2021 09:21 PM
Does anyone Recognise the origons of this Chassis
 
3 Attachment(s)
G'day,

I have brought a car that has been through several owners and never completed. It has an Laurie Bongalis body, but Adam says its not one of his chassis. The previous owner has done some above chassis welding that looks poor, but the main chassis looks professionally done, and is powder coated.

I will attach some photos. Any help to identify would be great. Apparently it was brought from Melbourne 12 years ago, and had a sister car that was supposedly completed.

It has Jag suspension front and rear, but doesn't use jag subframe. It also has Jag power steering rack and was supposed to be setup for a XR8 engine.

Any help would be appreciated.

Mrs flatchat 02-15-2021 01:23 PM
Early RMC I think

LoBelly 02-16-2021 12:48 AM
I have an early RMC and I agree that parts of the chassis look similar but there are a lot of differences too - may have been home mods - but I am reluctant to call it as a RMC.

pocoaust 02-16-2021 11:11 PM
thanks guys... does anyone have an pics off a completed rmc chassis?

Paul

stephen low 02-18-2021 04:05 AM
Chassis pics - G-Force
 
Paul

These photos are of my G-Force chassis, which was a part take off from RMC.

https://thumbs2.imgbox.com/6f/b3/UzdzROot_t.jpg

https://thumbs2.imgbox.com/6f/f0/EkkMh0jx_t.jpg


This chassis was sold new to the original owner circa February 1997 so I think the G-Force chassis had been refined somewhat from anything build say around the start of the 90's.

I say that as your chassis appears very basic in set up and rudimentary in design but that's not to say it can't work.

Hope this might be of some help.

Cheers

Steve

pocoaust 02-20-2021 04:33 PM
more info.. I found a chassis number?
 
1 Attachment(s)
Hi guys,

Thanks for your help/

I found what appears to be a chassis number.

It has GOP(5) stamped and then the number 56670853

Any ideas?

pocoaust 02-20-2021 04:35 PM
correction.... 66708085B...

justcobra 08-29-2021 09:38 PM
Quote:
Originally Posted by Mrs flatchat (Post 1489166)
Early RMC I think
Reminds me of a RMC single stacker chassis. The RMC series 3 is a double stacker chassis to comply with tough Queensland Regulations.


All times are GMT -7. The time now is 10:54 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: