|
EFI Windsor replacement fuel rails and pressure regulator
Hey folks
Just wondering what fuel rails and regulators anyone used on their Windsors to replace the original standard stuff. Have had a very slight fuel weep at the input connector and though not yet sure if retightening has done the trick, its not something I want occurring. So looking to further tart up the motor with some new gear and the only two issues for now are what rails might not fit under the original plenum as it crosses over the driver side bank and what fuel regulator suits the standard set up. Has anyone already gone down this path that can provide some advice. Cheers Steve |
| All times are GMT -7. The time now is 11:10 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: