Roll Bars

cameron02 · #1 (**permalink**) 11-08-2003, 04:23 AM

Hi All,

I'm looking to get roll bars. I want one on the drivers and passenger side. I want them to be structural and I want them to look good. I've been told the DRB roll bars are not structural.

Who should I see about roll bars?

Regards

Cameron

BMK · #2 (**permalink**) 11-08-2003, 04:54 AM

Cameron

Doug Pierce at Beresford Rd, Lilydale Vic. can help you.

He supplied my roll bar and back stay. Very thick wall and mounts to the rear chassis and behind the seats.

300 mm centre and all fittings.

Also have a look at the club calendar as there is display on later in the month and you may wish to get to this day.

Owners and suppliers present.

Cheers

Bernie

Bernie Knight
Mt. Gambier South Australia.

OZVENOM · #3 (**permalink**) 11-09-2003, 01:19 AM

Hi another source for good quality roll bars is don from snake bite in Qld he can supply them to order with a long slip jointed rear brace . which you get separate and work out where it fits bes then get it tiged on and just needs a polish around the weld.

I can supply themor contact don direct on 07 5529 0877.

regard Scott

REPTYL · #4 (**permalink**) 11-10-2003, 04:28 AM

Unik steel in Dandenong will bend anything to any angle.

I think Doug may be your best bet though.

BMK · #5 (**permalink**) 11-10-2003, 04:35 AM

Cameron,

By all accounts there may be a few of us in cars at the Geelong Speedt6rials on Saturday and Sunday.. Could be worth a visit to see a few cars and meet a few people.

Don Pilling - Snake Bite has a four or five page catologue that he will send you.

Cheers

Bernie

Bernie Knight
Mt. Gambier South Australia.

cameron02 · #6 (**permalink**) 11-11-2003, 12:26 AM

Thank you all for your help