| NMattison |
02-04-2004 03:18 AM |
tilton floor mount pedals
i all i have presently installled my tilton racing floor mount pedals they are wonderful. but now i need to find a way to install a brake light switch. i have checked with tilton wildwood jegs summit and a few others for an inline brake pressure switch. and they say its not avaliable. so i dont know if there is another way to mount a regular elect switch, and possibly make a bracket. well any info would be greatly appreciated. thanks Neil
|
| 750hp |
02-04-2004 03:27 AM |
Neil - the guy that built my car over here (you posted this in the Australian section :) ) simply used an electrical switch off some non-descript import car, and made a small mount off the pedal box mount. They're small switches, so it shouldn't look ugly behind your brake switch.
|
| Cracker |
02-04-2004 05:52 AM |
Neil, like you I use the Tilton Floor mount system and use an electrical presure swith mounted inline with the rear brakes which is mounted directly on top of the the main rail behind the motor mount pillar. It works fine and I've never had a problem with the set-up. If you need pictures I'll try to get some for you - if not best of luck!
|
| NMattison |
02-04-2004 06:27 AM |
Where did you get it from? we can't seem to locate any such thing! any part # would be great. Thanx Neil
|
| Cracker |
02-04-2004 06:50 AM |
Neil, give me a call at the office at 800-895-7531 x101 when you have a chance.
|
| Cracker |
02-04-2004 07:09 AM |
Neil,
The instruction manual says to use the Stop Light Switch Ideal #SLS33. If that is what I have I can't tell you but it is what the assembly manual says to use so it most likely is correct. Best wishes!
|
| All times are GMT -7. The time now is 04:42 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
