|
Mounting locations for Windscreen etc
Does anyone have dimensions for the mounting locations for windscreen , rollbar , front & rear bumpers , fuel filler etc
Car is RHD (NZ) and can't find this info anywhere Thanks Paul |
dimensions
haakerp,
For instance the body cuts for a AC windscreen are usually are 1296mm apart to the inside faces of the side attachment bars, and are 62mm x 12mm openings. Measured across the surface of the aluminum cowl the are 1320mm apart to the inside faces. This is for an AC, but you should use a windscreen and measure it to get YOUR REQUIRED DIMENSION, in that way since the Originals vary a few mm's from the current market. A NOTE; between the three suppliers world wide they vary between each other a few mm's. Then the angle, that would be a function of the compounding cowl radii and the location of the side bar supports on the cowl support, who knows, your fabricator would. Dangerous game without the parts in hand. grumpy |
Paul,
I have some info on a DRB, but may not be relevant to your particular model. What model have you got? |
What Model ... didn't realise there were "models" ?
It's a 427 SC replica ... what else can I say ? 90" wheel base and approx 64" track ( measured at front wheels) Cheers Paul |
What I was getting at is if your car was built by one of the kit manufacturers then it is likely that they have spacing c/c etc required for what you want.
If not, then you'll just have to make it fit. |
| All times are GMT -7. The time now is 08:29 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: