|
Aluminium anodising
Hi all
%/ I have just spent an hour or so on the telephone trying to find someone who will do some anodising for me. Have taken some small aluminium brackets and pieces off the Cobra and want them anodised in the blue. :confused: Anyone know of a company that will do this for me, in either Melbourne or Adelaide? The companies I have spoken with are all geared up for large run anodising and will not do a half dozen brackets and bits. So I need a company that will do the one off and little jobs.. Thanks Bernie |
Bernie,
I know of a small place in South Brisbane if you're interested. I've got some small work to be done myself and could easily take yours along. |
Peter
Thanks for the offer. I will see what responses/Posts come up from Victoria. %/ If none, I will throw them in a box and courier them up IPEC. I don't want to be f:LOL::LOL::LOL:ing you about if I can find some place down here. I appreciate your offer to do this. Thanks Bernie |
Bernie..Interested in doing them yourself?.
Got a battery charger? Look here and find out how: http://www.warpig.com/paintball/technical/anodize.shtml Cheers |
Melbourne or Adelaide options
Les
I would be worried that the Drug Squad, C.I.A or F.B.I will raid my house if I start buying these chemicals. :confused: Then again.... I will anodise a few larger pieces and alternator brackets etc. I am a little nervous about doing it myself, so will send it up there if necessary. Would prefer a Melbourne or Adelaide company to do the job if there is one. Cheers Bernie |
Sook! ;)
Damn, I want some-one to anodize their own and then tell me if it was successful. :p Cheers |
Bernie - I'm pretty sure that HPC still do an anodised finish.
I had their Qld shop do my 4 link bars (red one in attached photo) http://www.hpcoatings.com.au/pages/contact.htm http://www.qldstreetcar.com/forum/up...0869601803.jpg |
Knights Anodising service P/l ?
Now Les
The real reason I don't want to do it myself is I saw the link - :eek: www.warpig.... - and thought noooooo way. Will try HPC via email now. Thanks again guys Cheers Bernie |
Craig
Thanks for placing those two sites on. %/ I am also trying for the look you have in the trunk there. I just emailed the 'HPC' site asking if they do it. So will let you know. I found four companies in Adelaide that do it, but they only do large quantity repeating work. For a moment I had one guy convinvced to put my stuff through as his own job for me. But he then went on to say that they don't go/change to blue for ages. Thanks for your help. Cheers Bernie |
| All times are GMT -7. The time now is 10:58 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: