|
efi
I am dumping my webers and coverting to efi.
You guys running 347's, what manifold,size throttle body,size injectors,ecu,heads,cam are you running?What sort of power are you making? I am planning to run a trickflow R manifold,75mm throttle body,32lb injectors and a haltec E6X ecu(on a 347 ported windsor snr's solid flat cam 248@.050, .560 lift, 110 lobes,10.1 comp....any opinions on this set up? Good bad or other wise? |
Everything looks good in your combination at first glance. Do you know how well the TFS R will match up to the heads? 75mm will be spot-on. What brand of 32's are you using? A lot of people seem to go straight to the FRPP-SVO 36lb/hr. Haltech will be fine but for less money, I bet you could have a chip burned for a stock EEC4 Ford computer at www.jmschip.com
The old Stang's going to come alive with all these goodies !!! |
Trick flow says with a 75mm t/b the "R" manifolds rpm range is 2500-7200. Spot on for 347.
I spoke to capa performance today and they said use A 80MM T/B and use the "red" bosch motorsport 30lbs per hour/45lbs fuel pressure good for 500hp. I am confused? |
Mmm... only one answer then. Try here : http://www.corral.net/forums/forumdi...php?forumid=55 If you search through the posts, I guarantee you the question will have been asked and answered a hundred times before.
|
| All times are GMT -7. The time now is 01:55 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: