Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Interior mirror (http://www.clubcobra.com/forums/australian-cobra-club/56498-interior-mirror.html)

Flip 08-09-2004 09:48 PM

Interior mirror
 
what is the best way to attach the interior mirror to the windscreen - araldyte, double sided tape ? Does the glass nee to be primed?

pneall 08-10-2004 01:50 AM

Most motor shops sell what you are looking for. Be careful where you mount that mirror as most of the stick on mirrors are pretty large and will give a big blindspot,

Phil

Flip 08-10-2004 04:49 AM

Thanks Phil I'll check them out:3DSMILE:

Aussie Mike 08-10-2004 06:05 AM

Didn't you watch the cannon ball run?

As he snaps off the mirror and say's "What's behind me is not important" (or something like that).

Loctite make a one shot mirror adhesive kit. It comes with a cleaning/priming solution and tube of special adhesive. About $10 from memory. Should be available at your local auto parts store.

Cheers

Mike

stefanog 08-10-2004 06:17 AM

Sorry Mike, that movie was actually the Gumball Rally! The person saying this phrase was the late Raul Julia!

Hey Flip, did your mirror fall off? if so why don't you go with the dashmount instead?

Just a thought!

Stef

Aussie Mike 08-10-2004 06:31 AM

Thanks for setting me straight. I've got to get those movies out and watch them again.

Cheers

stefanog 08-10-2004 06:34 AM

Hey Mike, how's your beast coming along? Will it make it to the nationals?

Stef

Karl Bebout 08-10-2004 07:12 AM

Flip, I've been using a Raydot for my dash mirror and like it pretty well. Finishline sells a slick mounting plate that puts the mirror in a good position and I think, looks good. If you go that route, use some sort of rubber dampener between the base of the mirror and the mounting plate to absorb vibration and your rearward view will be much better. Just my 2¢ worth.

Batman 08-10-2004 03:11 PM

I think a mirror from the MG A is a common choice. Dash mounted, rectangular shape. Could be the look & size you're after.
If you need a screen mounted to get through RWC or engineering then don't use too much glue:) It makes it hard to get off * clean when you go to change it.


All times are GMT -7. The time now is 04:49 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: