|
400TT / OZVENOM Suspension Querry
Gentleman
Like your vehicles I have a R32 GTR rear suspension setup. To attach the shock/spring units I fabricated brackets to clamp on to the hub carrier. With the suspension now attached it is 50mm higher than if I had used the cast iron hub carriers. I am using King Spring Pt No KPS 188 250lbs. Are these the springs or eqivilant the ones you used or if they are not what springs would be the best to use. Warren |
springs
Hi i used some kings springs that are 200 lbs sorry cant remember the part number but 250's should be ok though a little stiff. front i used 450 lbs and the ride is comfortable.
but still stiff enough for track work. OZ:3DSMILE: |
| All times are GMT -7. The time now is 09:46 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: