Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   LS1 trouble (http://www.clubcobra.com/forums/australian-cobra-club/63542-ls1-trouble.html)

ledge 04-16-2005 02:42 AM

LS1 trouble
 
Hi All ,
I just got my exhaust done (will post pics soon) but the problem i am having with the motor is that the Left Hand Sidepipe after about 1-2 minutes will be glowing red . The motor has a consistant miss have you guys got ant ideas for me .
All the plugs are new and they all fire as i have tested every one on there respective leads . I pulled the fuel rail of and turned it upside down then reconnected the injector plugs and turned the key and all the injectors are squirting . Fuel pressure is set to 55 psi or 380 killopascals .I also swapped oxygen sensors to no avail


Any Help would be much appreciated.

Paul

boxhead 04-16-2005 05:54 AM

My guess is the rubber gasket seal on the intake manifold is not sealing correctly or the map sensor seal is leaking.

Glowing exhaust is normally a lean condition, are there any trouble codes coming from ecu?

ledge 04-17-2005 03:54 AM

I added pic of exhaust to my gallery .

Well i done compression test and the left bank was all over the place ranging from 125 to 175 and funnaly enough the right hand bank had 2 cylinders with 0 compression . The front 2 rocker arms had spat the bearings so i will be pulling it down i guess .:CRY:

Paul

Yetiman 04-17-2005 12:11 PM

Ouch

Tenrocca 04-17-2005 03:26 PM

Man. That'd break your heart. Im guessing its not a new one then. At least Im hoping its not.:JEKYLHYDE

pneall 04-17-2005 03:43 PM

Paul,

Thats not good to see. The LSI is a pretty tough motor so it looks like whoever owned it before gave it a hard time.

You will probably find that a rebuild is pretty expensive and a new motor from Eagle may be more economical.

Its probably better you found out now rather than after the painting and trimming was complete.

Hope it all works out OK.


Phil

ledge 04-18-2005 04:42 AM

I rang the wreckers that i got the motor from and they are going to fix it :)
Could have been costly

Thanks for the help guys

Paul

pneall 04-18-2005 03:44 PM

Paul, thats good news. You are lucky you started the motor before you finished the Cobra.

Phil:D

ledge 04-19-2005 01:48 AM

Yes i'll say
He has done the right thing by me because i got the motor over 12 months ago and there warranty is 3 months but we did discuss when i got the motor that it probably wouldnt be started for a year or so and to his credit he is being good about it

Paul

ledge 05-30-2005 06:09 AM

Hi All
Just letting you know that i got a call from the wreckers today and they have fixed my motor and it has cost them nearly 3g to fix the damage and he is chargeing me $150 to cover some of his labour costs . I must say that if anyone is looking for a motor and are concerned about warranties etc then go to All Panels and Parts and they will definetly look after you .

http://www.allpanelsandparts.com.au/index1.htm

Regards
Paul

blykins 05-30-2005 06:42 AM

What in the world on that engine cost $3k to fix?

pneall 05-30-2005 06:48 PM

Paul,

Glad to see that worked out OK for you. Nice to know there are decent suppliers in the motor trade.

Will you be ready for the Nationals?

Phil

BMK 05-30-2005 11:12 PM

Paul

That was a bit of luck with the guys helping there. Looks like a great yards they have.

Did they say what was wrong that cost $3,000..:confused:. (Asked by Blykins sorry)

Ford Quad cam 4.6....%/

Bernie

pneall 05-30-2005 11:27 PM

Bernie,

Probaly wasn't all that much wrong. Labour seems to be the killer these days.

Hows your rebuild going?

Phil

cameron02 05-31-2005 12:23 AM

not surprised at $3000

If you got all the parts required to build a 302 from ford it would cost $9000 just for parts. The newer the motor the less after market options.

Sounds like your supplier was very good


All times are GMT -7. The time now is 08:07 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: