![]() |
seat options
G'day yet again
Keen to find out what options in seat choices are out there. Have seen one or two posts that mainly talked on aftermarket seats. Am after adjustable seat style, me and the cheese and kisses have significantly different seating needs, ie long legs short arms and vicki verka, though I hope she will need to re-adjust the seat more often than I. Wouldn't mind a race style seat ie significant side support but suspect these preclude adjustability. Had a trimmer suggest a cobra he had trimmed had used cut down suzuki gti seats some years ago. What's out there that has good support, is adjustable and doesn't cost the earth? Ciao PS whose was the cobra at the last club meeting with those lovely blue trimmed seats, looked tremendous though I didn't spend enough time checking them out further just left drool marks instead - sorry! |
Quote:
|
Moving seats
I have the same problem, with different length people driving my car.
I used the revolution race gear classic seat and runners. I had the seats reworked so that i could get full travel on the runners. They are a little uncomfortable and I will get some extra padding hear and there and they should be OK. Thanks Phil |
I have some nice high back adjustale seats with the side supports on them. E0mail me and I can send you some pics.
|
Get that drool off my seats !!
Stephen
as Plums said I think they would be mine. I got them made by SAAS in Mulgrave and had them covered by Blackmans in Moorabbin. Came out pretty XXy but are very nicely finished and are comfy too. Had to shoehorn Plums in and out though:D Sorry Plums just kidding. Stephen PM me if you like and as Plums said I am close (Beaumaris) so would enjoy to come down & see your progress some time. Plums relocated the air intake sensor other day, really happy with the way its going and is pleaseure to drive. Leeroy |
If you are looking for factory seats, you have to investigate cars with the smallest cockpits.
MX5 seats fit well. We use them in the black Harrison. I think about half a dozen people have fitted them now to various kits - Harrison, DRB, CR etc. They also run speakers in the headrest, well on most seats anyway. RX7 seats are great looking seats, have harness holes, but a little wider, so snug fit. Factory seats are the cheapest way to go and when you eventually get it cockpit trimmed, they come up looking great. For MX5 seats check jap importers, most of seats have come from this source. Also a good bet is to contact MX5 clubs. |
Quote:
Glad to hear it's going well... How does it compare to the "other tune" on your crisp test mornings??? |
Seat option
Stephen, have you had a look at the seats from finishline
they sell a pair of seats to fit cobra (like mine) Regards |
Just remember they will need tro be ADR approved and that means they have to have a head rest.....to get it through rego at least.
|
Mine are adjustable and very comfortable. I believe they are out of an Acura. You might call Lone Star and ask what Acura they are out of. I did not build my car or I would know myself.
Bruce |
i'm using cobra clubman high backs however i i have a set of carbon fiber
seats i will be posting on for sale items. no upholstery just the bare carbon fiber seats original style. could probably upholster them fairly cheap! johnny_cobra@msn.com |
Thanks for all the comments guys, will follow up on the local options.
1Bad66 let me now whose seats you are using and if you can provide an email contact address that would be great. Leeroy contact number is 0400 934 027 or email at low.benholm@optusnet.com.au, would be keen to have a close look at your car anyway with camera in hand for ideas. Cheers Many thanks all. |
I sent you a e-mail with the web site.....let me know if you did not get it.
|
1bad66
Yes I got the link and had a look. Landed in Oz i suspect they will be too expensive but will keep looking. Craig What do you mean by factory seats and where do i need to look to get some vision of these? Cheers |
| All times are GMT -7. The time now is 09:01 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: