|
Brake and clutch pedal set up
Hi all. Ive been tinkering with the brake and clutch pedals and have a couple of questions:
I have 3 holes in the bracket for the pivot bolt. Has every one put theirs in the furthest forward hole? If I do this it appears the cylinder push roads would need to be shortened by more then the 15mm as suggested in the comprehensive build manual. The brackets for the brake pedal are not centralised between the 2 master cylinder mounting positions. Going by memory I need to offset the pedal 8mm to the right of centre for it to be in the middle of the 2 cylinders. This seems a lot and going by everyone elses gallery pics mine is a little more out then normal? Cheers. |
| All times are GMT -7. The time now is 02:22 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: