|
Break issues DRB Cobra Australia
Hi guys need some technical advice I built and registered a DRB2000 Cobra
Check the photos, however I have a issue with the breaks, HQ disk front VH Commodore rear and the LX Torana booster and master cylinder. My issue is soft peddle. I can bleed the system and have good peddle but after half an hour it gets spongy? Any suggestions to fix the problem would be great. Enjoy the Ride Barker |
try to brake clamp all four of your lines and then pump your brake and take a clamp of one by one and hopefully you will find the faulty line or brake.
Try that and see how you go. |
| All times are GMT -7. The time now is 07:27 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: