|
To make a simple jig to cut the tubes--use a square piece just oversize of the header tube size--weld on a piece to clamp the curved piece--cut lengthwise thru the curve with a saw, turn over 90* and cut second side--they all should fit together perfectly--practice on mild steel, stainless is $$$$$
Cut back the joined end to the diameter you want, you will probably want to pretrim so the tig torch will fit in the opening I've started just buying mine from down in Nascar land!!! Jerry |
Wind the wick up on the vortec and the gases WILL get out somewhere high flow cats or not!!
|
Well the Cobras been on the back burner for a while but I am now back into it with a vengeance here are a few pics off the collectors that we have fabricated they are 2" primaries into 3 1/2" that will step up to a 4 1/2 pipe
http://i35.photobucket.com/albums/d1...1/Image117.jpg http://i35.photobucket.com/albums/d1...1/Image122.jpg http://i35.photobucket.com/albums/d1...1/Image124.jpg |
Nice job! Those should flow very nicely.
|
$hit, they look fantastic
REGARDS. |
RE: Side pipes
1 Attachment(s)
Hi guys
Don't mean to butt in but on this topic I just thought you might like to see the workmanship of the guys at Liverpool Exhausts who made up the exhaust system for my GT40. Given the limited amount of room they had to work with they did a great job and made these to my exact specifications and requirements. Full stainless steel and ceramic coated. Dimi |
Nice pipes!
A BOSS in a GT40 - cool! :MECOOL: |
Welcome to the Forum Dimi. Nice setup you've got there. How did you go getting it through the noise tests?
Cheers |
Thanks, side pipes will be my next big upgrade project.
Dwight |
Beautiful work
Just awesome fabrication:cool:
|
Dimi,
Clearly I went to the wrong people. Nice work, mind if I ask how much? PM me if required. Beejay |
Nice small Cats, what are they from?
|
RE; Small cats
Hi
Not sure what the cats were but they are stainless and were shortened to fit into the available space. Oxy sensors were also fitted into the cats both before and after as per the stock Boss engine setup. Dimi |
|
| All times are GMT -7. The time now is 01:08 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: