|
I had a build manual but gave it to another Evans builder years ago
and for what it is worth, it was pretty useless. Paul Wooley died last wek so no use to you either. Email me on what you have and where it is at build wise and I will see if I can help you out. brett@faxnfigures.com.au Cheers BJ |
Thanks Brett will do
I will send what I have plus photos in the next few days Mal S |
Hi Busta,
I have a completed Evans which I bought 12 months ago. I am unfortunately in Victoria which not exactly around the corner. (even for you guys in the NT) I have the build manual its pretty basic but may be of some use. I also have a list of all the bits the bloke who built it purchased. This might be handy to give you some ideas of what he used. Also not sure if you know Classic Glass Cars have a very similar if not the same chassis. I believe Paul Wooley worked for them for sometime as well. I have done a bit of tinkering around with mine so I may be able to give you some advice. I am more than happy to take pics of detailed bits if you need. Send me a PM with your email and I can scan the manual and other documentation I have. Cheers Andrew |
Isn't Ringwood part of Melbourne?
You guys should be neighbours! Cheers |
Evans kit
Hi Andrew
I am in Ringwood It would be great if you could scan and send the manual and specs I believe mine is a Evans kit with a Paul Woodley chassis and jag running gear This is based on the paper work that I have which is the original purcase list My email is Malcolm.spears@aecom.com Thanks for the help Mal S |
Quote:
|
i think i still have a promo video from when i bought my kit off him .the manual went with the guy that bought the car off me . altho tbh the manual was a poorly photo copied and very hard to decipher is some places ..
cheers dean |
Hi Malcolm
Have a look at the front left hand shock tower. Up high and on the outside one of the plates has an indent. On an Evans chassis it will have an identification number hand stamped on it. On mine, for example, it has stamped "E002". The late Paul Wooley told me this about ten years ago. It's possible Mr Evans copied that process from Mr Wooley. When I applied for a permit to build my version of a Cobra replica from the Motor Vehicle Registry Technical Advisory Committee they did not recognize that number. Hope this helps you a bit. Cheers Dave |
| All times are GMT -7. The time now is 08:49 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: